Electronic Devices
"Jet4-E" All inclusive
"Jet4-E" are 2 sensors 1 channel. Electronic measuring system for testing Common Rail injectors with the function of coding BOSCH, DENSO, DELPHI, SIEMENS injectors, vacuum unit, "TEPI", fuel receivers.
CR-Next Valve stroke actuator
The “CR-Next Valve stroke actuator” device is designed to supply a signal to control the solenoid valve of the COMMON RAIL electromagnetic injectors manufactured by BOSCH, to measure the valve stroke by measuring the magnetic gap.
Diesel tester CR-I1-4I
Diesel tester CR-IP.1-4I
The "Diesel tester CR-IP.1-4I" is designed to diagnose Common Rail injectors from Bosch, Denso, Delphi, Siemens VDO on the test bench.
DT OS.112/V8 Single channel injector tester
The "Diesel Tester OS.112 / V8" device is the electronic control unit for common rail injectors. It is the updated and improved version of the CR-Tester (single-channel injector tester).
JET-CODE complex
The JET-CODE complex is intended for correction injector parameters in the code and generate a new code. Supported types of codable injectors: BOSCH, DELPHI, DENSO, SIEMENS. The complex includes: JET-CODE program, USB-CODER (for 10,000 encodings).
Mega Tester
Mega Tester V4
The Mega Tester is the device to test the piezo injectors manufactured by Bosch, Siemens VDO, Denso. That allows you to: measure the capacitance of the piezoelectric element, measure the resistance of the piezoelectric element under voltage measure the insulation resistance under elevated voltage by means of the injector control voltage to measure the stroke of the piezoelectric element. measure the gap between the piezo actuator and the pusher of injector hydraulic valve (from -2.0 µm till 15.0 µm).
Valve Tester V1
Valve tester V1
The Valve Tester V1 is an electronic device that measures the electrical parameters of a solenoid of an electrically controlled injector any type and any manufacturer (Common Rail, UIS, HEUI and other).