UIS TESTER

The device “UIS-Tester” is created to test and verify the performance of unit injectors (UIS -Unit Injector System) and individual high-pressure fuel pumps with high-pressure solenoid valves (UPS -Unit Pump System).

The device "UIS-Tester" allows you to:

  • set the control signal of the high pressure solenoid valve;
  • measure the rotational speed of the cam shaft;
  • set the required number of cycles;
  • preset mode, for 5 solenoid valve control modes;
  • set any value of the advance angle of the solenoid valve.
Specification
Supply voltage 220 V ± 15 %
Signal delay angle 0° ... 359°
The number of injections per minute 100 … 1500
The mass of the device is 8 kg
Dimensions (length x width x height) 365 x 320 x 110 mm
Power consumption up to 750 W