Valve tester V1

Valve Tester V1 - Factory direct sales

The Valve Tester V1 is designed to diagnose and measure the operating parameters of the control solenoid valves of the fuel equipment (for example, Common Rail injectors, unit injectors and sections). The Valve Tester allows you to tune the control solenoid to ensure that it operates in the same way for all engine cylinders (to ensure smooth engine operation).

The operating parameters of the control solenoid valve are among the basic parameters (along with the hydraulic parameters of the metering device and the compression value in the cylinders) and directly affect the uniformity of fuel delivery and the uniformity of engine rotation.

The device allows you to determine the following parameters of the control solenoid valve using a control signal:

  • measurement of solenoid’s operating current;
  • measurement of solenoid’s release current;
  • indirect measurement of the air gap of the solenoid valve;
  • measuring the inductance of solenoid;
  • measuring the resistance of solenoid.

Now, the device allows working with the following types of solenoid control valves:

  • BOSCH 799XXX;
  • BOSCH 755XXX;
  • BOSCH 720XXX;
  • BOSCH 720XXX;
  • BOSCH CRI 1;
  • BOSCH CRI 2-18;
  • BOSCH CRI 2-20;
  • Denso 3 Ohm;
  • Denso 0,5 Ohm;
  • custom.